I need to use the monitor but it do’nt work on my hardware/system.
To get my smart status the command is:
smartctl -a -d 3ware,0 /dev/twe0 (for the first hdd in the raid)
smartctl -a -d 3ware,1 /dev/twe0 (for the second hdd in the raid)
and not /dev/sda (the default in webmin).
So, can you modify the SMART Monitor and the SMART Drive Status Module Config, to specify directly the full path of each device we want.
And if I am in the error, correct me ;).
My system:
Webmin 1.441
VirtualMin 3.64gpl
Ubuntu 8.10 x64 (Linux 2.6.24.5-grsec-xxxx-grs-ipv4-64 on x86_64)
(No response about that in other post)