# Webmin virtualmin is there a tab for each when using the gpl version?

**URL:** <https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785>\
**Category:** Webmin\
**Created:** [August 17, 2026, 11:24am UTC](https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785 "2026-08-17T11:24:47Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![colbyt](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/c/8baadc/32.png) [@colbyt](https://forum.virtualmin.com/u/colbyt)\
**Post date:** [August 17, 2026, 11:24am UTC](https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785/1 "2026-08-17T11:24:47Z")

</div>

| SYSTEM INFORMATION | |
| --- | --- |
| OS type and version | Ubuntu 26.xx |
| Webmin version | 2.653 |

I am asking this question here because I am getting conflicting answers from 2 different AI search engines and I want a link to point the incorrect one to.

Source1: In the GPL version of Virtualmin, there is no separate tab for Webmin; instead, Virtualmin operates as a module within Webmin, meaning you manage everything through the Webmin interface. You can access Virtualmin features from the Webmin dashboard without needing a distinct tab for each.

Source2: Yes, the Virtualmin GPL interface features separate navigation tabs at the top of the left-hand menu to switch between **Webmin** and **Virtualmin**. [[1](https://www.virtualmin.com/docs/getting-started/how-to-navigate-in-virtualmin/)]

I know the following to be a fact: I told the installer to install both. I have most of the functions of virtualmin. I do not have a separate tab. I am also sure that I read that somewhere here that there were no longer separate tabs.

If this is an error to update an old page that source2, please do not think I am being critical I am just reporting a confusing issue. With over a 1000 pages of documentation online it is very hard to update everything.

---

<div class="post-metadata">

**Author:** ![Ilia](https://cdn.forum.virtualmin.com/user_avatar/forum.virtualmin.com/ilia/32/10185_2.png) [@Ilia](https://forum.virtualmin.com/u/Ilia)\
**Post date:** [August 17, 2026, 12:14pm UTC](https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785/2 "2026-08-17T12:14:42Z")

</div>

Hello,

Virtualmin `virtual-server` is a Webmin module, so it cannot run without Webmin. Plugins such as Virtualmin WP Workbench, Virtualmin Podman, and Virtualmin Nginx are technically Webmin modules as well.

This is the same in both GPL and Pro. The overall UI layout and tabs are the same. Pro simply includes additional features and plugins that aren’t available in GPL.

What changes the menu layout is the [login type](https://www.virtualmin.com/docs/getting-started/understanding-virtual-server-and-account-types/#mailftp-users). The [docs page](https://www.virtualmin.com/docs/) is up-to-date. Confusion here is about the different login types rather than outdated documentation.

The master administrator login, essentially Webmin root, sees two switches at the top of the left-hand menu: **Webmin** and **Virtualmin**.

 ![image](https://cdn.forum.virtualmin.com/uploads/default/original/3X/3/4/34988384af59e53cbf9988fa523571453bdc7e35.jpeg)

Domain owners only see the Virtualmin side, so those switches don’t appear for them. Mail/FTP users don’t log in to Webmin at all.

 ![image](https://cdn.forum.virtualmin.com/uploads/default/original/3X/5/4/54929f2ae5467ce48e7fe1d01ad9203d608f6244.jpeg)

Lastly, I wouldn’t recommend installing Virtualmin manually. The best way is to use the official Virtualmin installation script on a fresh, supported OS. And, I think I indirectly answered your question in my previous response, where I also explained how to install Virtualmin on Ubuntu 26.04:

> [@How do I install PHP-FPM on a Webmin-only installation?](https://forum.virtualmin.com/t/how-do-i-install-php-fpm-on-a-webmin-only-installation/137779/9):
>
> I assume you want Virtualmin installed. It will correctly configure everything you need, including PHP-FPM. Ubuntu 26.04 is technically supported, though it is currently available only as a Grade B system. It will move to Grade A with our next release. You can install it using: sudo sh -c "$(curl -fsSL https://download.virtualmin.com/virtualmin-install)" -- --bundle LAMP --os-grade B However, if you want to install PHP-FPM, you can follow our guide, which also works for Webmin-only installa…

---

<div class="post-metadata">

**Author:** ![colbyt](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/c/8baadc/32.png) [@colbyt](https://forum.virtualmin.com/u/colbyt)\
**Post date:** [August 17, 2026, 12:44pm UTC](https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785/3 "2026-08-17T12:44:01Z")

</div>

I thought I did install it. I don’t have two tabs when logging in as root so perhaps I did not.

No real sites there yet. I did create one virtual server in addition to the default server that has the same name and points to the default location. Should I delete that?

Is it safe to do the automated install as you posted in the other thread?

I can always wipe it all and start again if I need to do so.

---

<div class="post-metadata">

**Author:** ![Ilia](https://cdn.forum.virtualmin.com/user_avatar/forum.virtualmin.com/ilia/32/10185_2.png) [@Ilia](https://forum.virtualmin.com/u/Ilia)\
**Post date:** [August 17, 2026, 1:40pm UTC](https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785/4 "2026-08-17T13:40:56Z")

</div>

> [@colbyt](#):
>
> I thought I did install it. I don’t have two tabs when logging in as root so perhaps I did not.

If you’re not sure, just start over. Spin up a clean new Ubuntu 26.04 TLS server, then run the installation command I linked in my previous post, and that’s it.

> [@colbyt](#):
>
> Is it safe to do the automated install as you posted in the other thread?

It’s not only safe but also the only recommended way to install it.

However, Ubuntu 26.04 is not yet fully supported in the stable repos, but support is coming soon.

To make experience more smooth, you could add the `--branch unstable` flag to the installation command to install the latest development version, and then downgrade the repos to stable using `virtualmin setup-repos --branch stable` right after.

It will work fine for now. When the next Virtualmin version is released, it will replace the development version. With Virtualmin 8.1.0 this is the way to go for Ubuntu 26.04.

And you could always use Ubuntu 24.04 for the time being if you want a more stable experience.

---

<div class="post-metadata">

**Author:** ![urthllc](https://cdn.forum.virtualmin.com/user_avatar/forum.virtualmin.com/urthllc/32/677_2.png) [@urthllc](https://forum.virtualmin.com/u/urthllc)\
**Post date:** [August 24, 2026, 3:19pm UTC](https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785/5 "2026-08-24T15:19:51Z")

</div>

I was about to ask a similar question because for some reason my webmin tab had dissapeared and I only had a virtualmin tab and a dahsboard tab. I simply looged out and then logged back in and it was back to normal, not sure why it did that.

---

<div class="post-metadata">

**Author:** ![jimr1](https://cdn.forum.virtualmin.com/user_avatar/forum.virtualmin.com/jimr1/32/14173_2.png) [@jimr1](https://forum.virtualmin.com/u/jimr1)\
**Post date:** [August 24, 2026, 4:05pm UTC](https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785/6 "2026-08-24T16:05:04Z")

</div>

You have logged in as a domain owner and not an admin, try logging as root or any user that has sudo capabilities

---

<div class="post-metadata">

**Author:** ![system](https://cdn.forum.virtualmin.com/uploads/default/original/2X/c/cd96d761e326db4b2bef94886a639109bd7a8e76.svg) [@system](https://forum.virtualmin.com/u/system)\
**Post date:** [October 23, 2026, 4:53pm UTC](https://forum.virtualmin.com/t/webmin-virtualmin-is-there-a-tab-for-each-when-using-the-gpl-version/137785/8 "2026-10-23T16:53:57Z")

</div>

Closed on October 23, 2026, 4:53pm UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.
