cloudmin failed install on centos7 centos-release-7-5.1804.el7.centos.2.x86_64

Cloudmin
1

I have tried installing cloudmin on a cloud VM. This is not a dedicated machine with physical cards however I do have multiple IP addresses assigned. I assume these are virtual cards with multiple ip assigned. This cloud has 4 cores, 4 gig and lots of room. I would like to create multiple instances with cloudmin to manage.

What am I doing wrong or is cloudmin not able to handle virtual cards?

ip addr:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/void
inet 127.0.0.1/32 scope host venet0
inet 173.209.54.208/32 brd 173.209.54.208 scope global venet0:0
inet 173.209.54.210/32 brd 173.209.54.210 scope global venet0:1
inet 173.209.54.211/32 brd 173.209.54.211 scope global venet0:2

network-scripts:
ifcfg-lo
ifcfg-venet0
DEVICE=venet0
BOOTPROTO=static
ONBOOT=yes
ARPCHECK=“no”
IPADDR=127.0.0.1
NETMASK=255.255.255.255
BROADCAST=0.0.0.0
ARPCHECK=“no”
IPV6INIT=“yes”

ifcfg-venet0:0
DEVICE=venet0:0
ONBOOT=yes
ARPCHECK=“no”
IPADDR=173.209.54.208
NETMASK=255.255.255.255

ifcfg-venet0:1
DEVICE=venet0:1
ONBOOT=yes
ARPCHECK=“no”
IPADDR=173.209.54.210
NETMASK=255.255.255.255

tail end of cloudmin script…

Installing and activating cgroups …

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

  • base: centos.mirror.netelligent.ca
  • extras: centos.mirror.globo.tech
  • updates: centos.mirror.colo-serv.net

    Package libcgroup-0.41-15.el7.x86_64 already installed and latest version

    Nothing to do

    Redirecting to /bin/systemctl start cgconfig.service

    Failed to start cgconfig.service: Unit not found.

    error reading information on service cgconfig: No such file or directory

    … done



    Activating KVM kernel module …

    … kernel module did not load successfully
2

fyi

the first error “Failed to start cgconfig.service: Unit not found.” was resolved by manual yum install “yum install libcgroup-tools”

results:

Redirecting to /bin/systemctl start cgconfig.service

Note: Forwarding request to ‘systemctl enable cgconfig.service’.

Created symlink from /etc/systemd/system/sysinit.target.wants/cgconfig.service to /usr/lib/systemd/system/cgconfig.service.

… done

Activating KVM kernel module …

… kernel module did not load successfully

3

relevant topic and more discussion @ https://www.virtualmin.com/node/39318

4

I’ve followed up on the ticket.

KVM can’t run inside of a virtual machine. OpenVZ is a container-based virtualization tool. You can’t run KVM or Xen inside of a container; they have to run on the bare metal. It’s sometimes possible to run OpenVZ or other container-based virtualization inside of a KVM or Xen instance if you’ve been granted the right privileges and the setup is correct, but KVM or Xen must run directly on the hardware.