# Big woops! Help please. **URL:** \ **Category:** Virtualmin\ **Created:** [April 10, 2010, 5:14pm UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189 "2010-04-10T17:14:36Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![mobiusllc](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/m/96bed5/32.png) [@mobiusllc](https://forum.virtualmin.com/u/mobiusllc)\ **Post date:** [April 10, 2010, 5:14pm UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189/1 "2010-04-10T17:14:36Z")
I had an ACL setup so that only our local subnet of 192.168.0.0 could access the webmin interface. Well…we did a change over to 192.168.127.x, and now I can’t access webmin hah. Woops! How can I change this so I can now access it from our new addresses? Will I have to re-install webmin? Thanks. ---
**Author:** ![Eric](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/e/898d66/32.png) [@Eric](https://forum.virtualmin.com/u/Eric)\ **Post date:** [April 11, 2010, 12:38am UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189/2 "2010-04-11T00:38:11Z")
Howdy, No, you definitely don’t need to reinstall Webmin 🙂 That said, I’m not sure which config file it’s in… that’s okay, you can find it if you’re able to log in over SSH. You can just run this command: `find /etc/webmin | xargs grep 192.168.127` You should only see a handful at most of hits – feel free to post what output you see in here and I’ll point you in the right direction. However, once we find the right file, it should be a matter of changing that old IP range to your new one, then restarting Webmin. -Eric ---
**Author:** ![mobiusllc](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/m/96bed5/32.png) [@mobiusllc](https://forum.virtualmin.com/u/mobiusllc)\ **Post date:** [April 12, 2010, 3:37pm UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189/3 "2010-04-12T15:37:44Z")
```auto ]# find /etc/webmin | xargs grep 192.168.127 /etc/webmin/virtual-server/localips:192.168.127.159 /etc/webmin/virtual-server/localips:192.168.127.162 /etc/webmin/virtual-server/localips:192.168.127.158 /etc/webmin/virtual-server/domains/122895484826911:ip=192.168.127.158 /etc/webmin/virtual-server/domains/124526116519484:ip=192.168.127.162 /etc/webmin/virtual-server/domains/123258002621223:ip=192.168.127.161 /etc/webmin/virtual-server/domains/12528578823275:ip=192.168.127.163 ``` Thanks! ---
**Author:** ![Eric](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/e/898d66/32.png) [@Eric](https://forum.virtualmin.com/u/Eric)\ **Post date:** [April 12, 2010, 3:45pm UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189/4 "2010-04-12T15:45:29Z")
Hrm… it seems I let you astray 🙂 You said you _changed_ the subnet to “192.168.127”… so me telling you to do a search on that subnet isn’t going to yield any useful information 🙂 Are you saying the old subnet was “192.168.0.\*”? If so, change the above command to: ` find /etc/webmin | xargs grep 192.168.0` If you don’t get any useful info out of that, you could always just drop the “0” out of the above, and it’ll find anything with “192.168.” in it. Feel free to post your output here, and we’ll figure out which file you need to edit 🙂 -Eric ---
**Author:** ![mobiusllc](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/m/96bed5/32.png) [@mobiusllc](https://forum.virtualmin.com/u/mobiusllc)\ **Post date:** [April 12, 2010, 3:53pm UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189/5 "2010-04-12T15:53:07Z")
heh. I was wondering about that. So I did do the .0 and all that returned was a bunch of my backup logs. Then this: ```auto /etc/webmin/time/config:timeserver=192.168.0.156 /etc/webmin/servers/1245195260.serv:host=192.168.0.43 ``` ---
**Author:** ![Eric](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/e/898d66/32.png) [@Eric](https://forum.virtualmin.com/u/Eric)\ **Post date:** [April 12, 2010, 3:54pm UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189/6 "2010-04-12T15:54:49Z")
Alright, yeah, that’s not it either then… try dropping the 0 altogether and see what we come up with 🙂 -Eric ---
**Author:** ![mobiusllc](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/m/96bed5/32.png) [@mobiusllc](https://forum.virtualmin.com/u/mobiusllc)\ **Post date:** [April 20, 2010, 2:24pm UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189/7 "2010-04-20T14:24:14Z")
Man… You will not believe this. I was doing your requested commands on the wrong flippin server. All fixed now. Thank you Andreychek. ---
**Author:** ![system](https://cdn.forum.virtualmin.com/uploads/default/original/2X/c/cd96d761e326db4b2bef94886a639109bd7a8e76.svg) [@system](https://forum.virtualmin.com/u/system)\ **Post date:** [April 30, 2020, 5:48am UTC](https://forum.virtualmin.com/t/big-woops-help-please/36189/8 "2020-04-30T05:48:44Z")
Closed on April 30, 2020, 5:48am UTC