# Adding ipv6 to a server

**URL:** <https://forum.virtualmin.com/t/adding-ipv6-to-a-server/116345>\
**Category:** Virtualmin\
**Created:** [August 5, 2022, 1:35pm UTC](https://forum.virtualmin.com/t/adding-ipv6-to-a-server/116345 "2022-08-05T13:35:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pierrot](https://cdn.forum.virtualmin.com/letter_avatar_proxy/v4/letter/p/da6949/32.png) [@Pierrot](https://forum.virtualmin.com/u/Pierrot)\
**Post date:** [August 5, 2022, 1:35pm UTC](https://forum.virtualmin.com/t/adding-ipv6-to-a-server/116345/1 "2022-08-05T13:35:17Z")

</div>

| SYSTEM INFORMATION | |
| --- | --- |
| OS type and version | Debian 11 |
| Webmin version | 1.994 |
| Virtualmin version | 7.1-1 |

I have a just–freshly-installed server and I wanted to try setting up ipv6 on that machine. I read a lot of docs and threads, but I’m still stuck …

My datacenter operator is providing me with an IPv6 address: 2001:41d0:403:xxxx::/64 (xxxx for privacy) and a gateway 2001:41d0:0403:yyyy:00ff:00ff:00ff:00ff (yyyy being slightly different from xxxx).

If I follow [IPv6 and Virtualmin – Virtualmin](https://www.virtualmin.com/documentation/system/ipv6/) , i should go first to **Webmin** → **Networking** → **Network Interfaces** → `eth0` … I guess I have to go to “Active now” tab (“Activated at boot -” being empty), I don’t have a “eth0” but “eno1” with my IPv4 address and an IPv6 address reading fe80::ae1f:6bff:fed4:3aa (which I have on all Virtualmin servers).

If I try to edit that line to replace fe80::ae1f:6bff:fed4:3aa with my address 2001:41d0:403:xxxx:: it takes it (after many tests, I was stupidly removing the last “::” which made it not valid, I can save … and I went away, after applying configuration, to pursue with [IPv6 and Virtualmin – Virtualmin](https://www.virtualmin.com/documentation/system/ipv6/) …

Coming back after many unsuccessful other attempts, I came back to **Webmin** → **Networking** → **Network Interfaces** → `eno1` to discover that the IPv6 was back to fe80::ae1f:6bff:fed4:3aa … after more tests, I’m still unable to repalce that fe80::ae1f:6bff:fed4:3aa with my 2001:41d0:403:xxxx:: …

So I’m writing here to see if I’m already doing something wrong, bad method or bad IP’s or … ?

Thanks.  
Pierre

---

<div class="post-metadata">

**Author:** ![system](https://cdn.forum.virtualmin.com/uploads/default/original/2X/c/cd96d761e326db4b2bef94886a639109bd7a8e76.svg) [@system](https://forum.virtualmin.com/u/system)\
**Post date:** [October 4, 2022, 1:35pm UTC](https://forum.virtualmin.com/t/adding-ipv6-to-a-server/116345/2 "2022-10-04T13:35:29Z")

</div>

Closed on October 4, 2022, 1:35pm UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.
